The National Highway Traffic Safety Administration (NHTSA) lists 3 official safety recall campaigns for the 2016 BMW M3 in AutoUtility's current federal dataset. The primary affected vehicle systems include Powertrain & Transmission, Body & Structure. The 2016 BMW M3 belongs to the 5th Generation (F80) platform.
Key Recall Findings
- • Official Recall Campaigns: 3 campaigns on file with NHTSA
- • Primary Affected Subsystems: Powertrain & Transmission, Body & Structure
- • Official Remedy: Detailed per campaign in official NHTSA records below
- • Most Recent NHTSA Report: October 11, 2018
VIN-Specific Notice: Safety recall campaigns apply to specific production date ranges and vehicle identification numbers (VINs). A campaign listing on this model-year page does not establish that every vehicle or trim is affected. Check your 17-digit VIN at NHTSA.gov or with an authorized dealer to verify whether a safety repair is needed.
Vehicle Subsystem 2 campaigns
Powertrain & Transmission
NHTSA records also contain 1 consumer complaint filing involving this same system.
View Complaints →
Vehicle Subsystem 1 campaign
Body & Structure
NHTSA records also contain 1 consumer complaint filing involving this same system.
View Complaints →
Domain Mapping Methodology: A single NHTSA recall campaign may involve more than one vehicle subsystem (such as electrical wiring affecting fuel delivery), so domain totals can exceed the total number of unique recall campaigns. Complaint and recall counts are grouped by broad vehicle system; component co-occurrence does not establish that an individual owner complaint is related to a specific recall campaign.
NHTSA Campaign #18V713000 Powertrain & Transmission
Affected Component: POWER TRAIN:DRIVELINE:DRIVESHAFT
NHTSA Report Date: October 11, 2018
Safety Defect Summary: BMW of North America, LLC (BMW) is recalling certain 2016-2017 BMW M3 Sedans, 2016-2017 BMW M4 and M4 GTS Coupes and 2017 BMW M4 Convertible vehicles. The connection between the driveshaft and the flange may fail resulting in a loss of propulsion.
Safety Risk / Consequence: A loss of vehicle propulsion can increase the risk of a crash.
Authorized Remedy Instructions: BMW will notify vehicle owners, and dealers will replace the driveshaft, free of charge. The recall began April 9, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Manufacturer & NHTSA Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA Campaign #16V653000 Body & Structure
Affected Component: STRUCTURE:FRAME AND MEMBERS
NHTSA Report Date: September 9, 2016
Safety Defect Summary: BMW North America, LLC (BMW) is recalling certain model year 2016 BMW M2 Coupe vehicles, 2015-2017 M3 Sedan vehicles and 2015-2016 M4 Coupe and M4 Convertible vehicles. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.
Safety Risk / Consequence: Loose rear sub-frame bolts may adversely affect vehicle handling and control, increasing the risk of a crash.
Authorized Remedy Instructions: BMW will notify owners, and dealers will replace the rear sub-frame bolts with new bolts, free of charge. The recall began on November 3, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Manufacturer & NHTSA Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA Campaign #15V782000 Powertrain & Transmission
Affected Component: POWER TRAIN:DRIVELINE:DRIVESHAFT
NHTSA Report Date: November 23, 2015
Safety Defect Summary: BMW of North America, LLC (BMW) is recalling certain model year 2015-2016 M3 Sedan vehicles manufactured May 30, 2015, to September 2, 2015, 2016 M4 Coupe vehicles manufactured July 3, 2015, to September 11, 2015, and 2015-2016 M4 Convertible vehicles manufactured May 29, 2015, to August 4, 2015. The affected vehicles have a driveshaft with a slip-joint that may not have been filled with grease. As a result, the slip-joint may fail over time.
Safety Risk / Consequence: If the slip-joint fails, there would be a loss of power to the rear axle and therefore the vehicle would stop moving, increasing the risk of a crash.
Authorized Remedy Instructions: BMW will notify owners, and dealers will inspect the driveshaft, replacing it as necessary, free of charge. The recall began on January 14, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Manufacturer & NHTSA Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Source Data Notice: Campaign summaries, safety consequences, and remedy descriptions are direct text extracts published by the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation.
Historical Reporting Note: Recall campaign counts are shown by model year and should not be interpreted as a vehicle reliability score. Campaigns may cover multiple model years, and newer model years naturally have had less calendar exposure time for new safety campaigns to be issued.
Safety recall campaigns on this page are associated with this make, model, and model year in NHTSA federal records. A campaign may apply only to certain vehicles based on production date, equipment, manufacturing details, or other campaign-specific criteria.
AutoUtility cannot determine whether a particular VIN is affected or whether a recall remedy has already been completed.
For vehicle-specific recall status, check the 17-digit VIN using NHTSA's official recall lookup or contact an authorized dealer. Campaign-specific remedy information shown above is reproduced from official NHTSA recall records.
Official NHTSA Safety Resources:
NHTSA Vehicle Safety Hotline: 1-888-327-4236 (TTY: 711)